Deckenleisten
Arstyl offers not only luxurious cornices but also a variety of rosettes, wall profiles, plinths and columns. They are made of a polymer mixture, thus the elements are shockproof.
To ensure a quick and easy installation, the profiles and the associated mounting adhesive should be 24 hours in advance stored at room temperature. Before you get started with the installation, the following things should be considered: The surface of the wall and ceiling must be clean, dry, free of grease and dust free. It is also recommended that the surface is additionally sanded. An ideal room temperature is between 10°C to process and 35°C to the crown molding. The crown moldings are a special type recommended by the manufacturer, assembly adhesive (at the NMC is the Adefix-Glue) processes. For the abutting edges there is a separate adhesive, this would be the Adefix Plus. After assembly, the trim can be painted with emulsion paint or a varnish. So you can easily and individually tune your newly acquired crown molding color to your home.
A new trend is to emphasize the moldings with a high-gloss finish, with the brightness of the bars are still better. Each room has been decorated with a cornice, looks much more elegant and homely.
Besides the lovely look of this trim also have a very practical effect. You can hide cracks or unevenness. Moreover ledges make the transition from wall to ceiling softer. With the right stucco profiles, you can let the room height is lower or higher.
The selection of the ledges is very large. Therefore, you may like to pre-order this one pattern. The samples are supplied in 20 cm sections directly to your home.
garnish profile TI made of extruded PS-hard foam, pre-primed, for wall and ceiling NMC
garnish profile AT made of extruded PS-hard foam, pre-primed, for wall and ceiling NMC
profile Z3 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€29.34 / 1 m)
garnish profile GR made of extruded PS-hard foam, without primer, for wall and ceiling NMC
garnish profile WT9 extra hard, made of HDPS, voll recycelbar and pre-primed NMC
Content: 2 m (€6.64 / 1 m)
profile Z40 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€59.28 / 1 m)
panel moulding WL1 reversible, extra hard, made of HDPS, fully recyclable and pre-primed NMC
Content: 2 m (€7.40 / 1 m)
profile Z16 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€16.98 / 1 m)
garnish profile M1 made of extruded PS-hard foam, pre-primed, for wall and ceiling NMC
Lighting moulding IL5 from NMC, particularly hard, primed and fully recyclable, made of PU rigid foam
Content: 2 m (€20.56 / 1 m)
profile Z17 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€30.26 / 1 m)
profile Z18 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€15.32 / 1 m)
garnish profile WT16 extra hard, made of HDPS, voll recycelbar and pre-primed NMC
Content: 2 m (€7.18 / 1 m)
profile Z2 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€29.90 / 1 m)
curtain rail IL18, particularly hard, made of HDPS, primed and fully recyclable, NMC, cornice, baseboard, LED not included, size: 200 x 12,1 x 9 cm
Content: 2 m (€16.98 / 1 m)
flat panel mouldinge N made of extruded PS-hard foam, pre-primed, NMC
garnish profile WT2 extra hard, made of HDPS, voll recycelbar and pre-primed NMC
Content: 2 m (€9.70 / 1 m)
profile Z14 made of PU-hard foam, pre-primed, NMC
Content: 2 m (€23.47 / 1 m)
garnish profile AD23 made of PU-hard foam, pre-primed, NMC
Content: 2 m (€50.56 / 1 m)
profile Z11 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€38.74 / 1 m)
garnish profile H made of extruded PS-hard foam, pre-primed, for wall and ceiling NMC
profile Z22 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€33.03 / 1 m)
for morne Z52 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€27.01 / 1 m)
garnish profile WT4 extra hard, made of HDPS, voll recycelbar and pre-primed NMC, incl. clips
Content: 2 m (€27.80 / 1 m)
garnish profile WT17 extra hard, made of HDPS, voll recycelbar and pre-primed NMC
Content: 2 m (€17.03 / 1 m)
Set Nomastyl A2 consisting of 8 Stucco Mouldings each 2 m = 16 m and 2 cartridges of Adefix Glue
garnish profile AD24 made of PU-hard foam, pre-primed, NMC
Content: 2 m (€50.57 / 1 m)
garnish profile WT25 extra hard, made of HDPS, voll recycelbar and pre-primed NMC
Content: 2 m (€13.29 / 1 m)
garnish profile TL made of extruded PS-hard foam, pre-primed, for wall and ceiling NMC
garnish profile WT7 extra hard, made of HDPS, voll recycelbar and pre-primed NMC
Lighting profile IL1 extra hard, made of HDPS, fully recyclable and pre-primed, NMC
Content: 2 m (€30.82 / 1 m)
profile Z41 made of PU-hard foam, pre-primed, NMC
Content: 2 m (€56.16 / 1 m)
flat panel mouldinge O made of extruded PS-hard foam, pre-primed, NMC
garnish profile SM made of extruded PS-hard foam, pre-primed, for wall and ceiling NMC
The L1 profile from NMC offers versatile design options for modern interiors thanks to its clean linear shape. Made of high quality PU hard foam it is preprimed and features a ready to paint surface. The hollow back section is ideal for hidden cable routing or discreet pipe covering and creates seamless transitions with integrated lighting.
Content: 2 m (€46.69 / 1 m)
The L4 profile from NMC impresses with subtle elegance and versatile function. Made of PU hard foam it is preprimed ready to paint and suitable for humid environments. The integrated hollow section allows for discreet pipe covering or indirect LED lighting to create a smooth and atmospheric look.
Content: 2 m (€29.68 / 1 m)
garnish profile WT3 extra hard, made of HDPS, voll recycelbar and pre-primed NMC
Content: 2 m (€19.82 / 1 m)
profile Z8 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€16.44 / 1 m)
Ceiling molding T40, particularly hard, made of HDPS, fully recyclable, NMC, wall molding, only primed on one side (stepped side without primer)
Content: 2 m (€5.34 / 1 m)
Set Nomastyl K consisting of 8 Stucco Mouldings each 2 m = 16 m and 2 cartridges of Adefix Glue
profile Z5 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€36.86 / 1 m)
profile Z9 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€17.41 / 1 m)
profile Z24 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€33.04 / 1 m)
garnish profile AD22 made of PU-hard foam, pre-primed, NMC
Content: 2 m (€57.39 / 1 m)
The L2 profile from NMC features clean lines and subtle elegance for modern interiors. Made of PU hard foam it is preprimed with a ready to paint surface. The large hollow section is ideal for LED lighting as well as for concealed cable routing or pipe covering.
Content: 2 m (€63.03 / 1 m)
Decorative profile WT22 NMC, cornice cornice particularly hard, from HDPS, primed, painted over, fully recyclable, for a seamless ceiling and wall completion
Content: 2 m (€42.82 / 1 m)
profile Z21 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€28.62 / 1 m)
profile Z4 made of PU-hard foam, pre-primed, connection with dowels NMC
Content: 2 m (€42.24 / 1 m)